软管泵 路沿石成型机本地厂家值得信赖

软管泵的使用注意事项：
1、使用软管泵时调压板请不要拧得太紧，以免“扎死”泵头，一般调到有液体流出即可，以延长其使用寿命。  
2、泵头在快速运转中，切勿按动“顺/逆”开关，若要按动，则先将速度调慢后再按动，然后再将速度调至原来速度，即将电压表读数调至原来值。  
3、软管泵在使用期间，应随时注意软管是否完好，一般在中速情况下运转为佳，当发现软管使用老化时，应及时更换软管。  
4、使用完毕要将泵头清洗干净，若长时间不使用，应取下软管，以延长其使用寿命。  
5、软管泵长期不用时，请把软管从泵头中取出，延长其使用寿命。软管是易损物品，使用一段时间后请及时更换。不然会造成漏液，损坏仪器！  
6、根据不同介质和不同流量，请选用不同粗细的软管。

工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 

首先我们先介绍一下软管泵，软管泵又称蠕动泵。为了泵体污染流体或流体污染泵体的危险性，整个泵的装置中只有软管与介质接触。在一般场合下，软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶，其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质，以及有机化学物质。内层是橡胶，而外层是天然橡胶或者是复合橡胶。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.